The Effects of Beating,Web Forming and Sizing on the Surface Energy of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> Kraft Fibres Evaluated by Inverse Gas Chromatography

In this work attention has been focused on the effects of papermaking beating, web forming and sizing operations on the physical/chemical surface properties of bleached Eucalyptus globulus kraft fibres. Inverse gas chromatography (IGC) was used to determine the dispersive component of surface tension (γ_s^d) as well as the acidic/basic character (according to the Lewis concept) of the solid surfaces (pulp fibres and pulp handsheets). The results have shown that the main effect of beating is to increase the fibre's Lewis acidic character. Web forming caused a strong decrease in γ_s^d and significant increments in the adhesion works of both acidic and basic probes, lowering the ratio between the two. Nevertheless, the surface of handsheets still exhibited a dominant acidic character. The sizing operation did not change the dispersive component of the surface tension significantly but decreased the difference between the adhesion works of the acidic and basic probes, rendering the handsheet surface less Lewis acidic and more Lewis basic. Thus, although internal sizing is expected to strongly influence liquid spreading at the paper surface and liquid penetration of the fibre's network, it is concluded that beating and web forming lead to important changes in the surface energetic properties of the Eucalyptus globulus kraft fibres.     

Fluorescence ratiometric pH sensor prepared from covalently immobilized porphyrin and benzothioxanthene

A fluorescence ratiometric sensor for pH determination is described in this paper. The sensor incorporated the pH-sensitive dye meso-5,10,15,20-tetra-(4-allyloxyphenyl)porphyrin (TAPP) as an indicator and a pH-insensitive dye N-(2-methacryloxyethyl)benzo[k,l]thioxanthene-3,4-dicarboximide (MBTD), a benzothioxanthene derivative, as a reference for fluorescence ratiometric measurement. To prevent leakage of the dyes, both were photocopolymerized with acrylamide, hydroxyethyl methacrylate, and triethylene glycol dimethacrylate on the silanized glass surface. The reproducibility and response time of the prepared sensor were sufficient. Most common coexisting inorganic ions and organic compounds did not interfere with pH sensing. In the acidic pH range from 1.5 to 5.0 the fluorescence intensity ratio of the two dyes varied linearly as a function of pH. The sensing membrane was found to have a lifetime of at least one month. The sensor was applied to the analysis of waste water and artificial samples.     

Sixth algebraic order trigonometrically fitted predictor–corrector methods for the numerical solution of the radial Schrödinger equation

Our new trigonometrically fitted predictor–corrector (P–C) schemes presented here are based on the well known Adams–Bashforth–Moulton methods: the predictor is based on the fifth order Adams–Bashforth scheme and the corrector on the sixth order Adams–Moulton scheme. We tested the efficiency of our newly developed schemes against well known methods, with excellent results. The numerical experiments showed that at least one of our schemes is noticeably more efficient compared to other methods, some of which are specially designed for this type of problem. It is also worth mentioning that this is the first time that sixth algebraic order trigonometrically fitted Adams–Bashforth–Moulton P–C schemes are used to efficiently solve the radial Schrödinger equation.Active Member of the European Academy of Sciences and Arts     

Synthesis of Novel <Emphasis Type="Italic">D</Emphasis>-<Emphasis Type="Italic">Seco</Emphasis>-Pregnenes

Summary. A new synthetic route was developed for the preparation of trans-3-hydroxy-16,17-seco-pregna-5,17(20)-dien-16-al, using Grob fragmentation as the key step. This seco-steroid contains a formyl group and an unsaturated side-chain in a sterically favourable position, and is therefore a promising starting material for the synthesis of novel condensed steroid heterocycles.Received March 22, 2003; accepted April 22, 2003 Published online September 25, 2003     

Analysis of functional groups on the surface of plasma-treated carbon nanofibers

Plasma chemically modified carbon nanofibers were characterized by X-ray photoelectron spectroscopy with regard to the content of carbon, oxygen, and nitrogen and the contribution of carboxylic groups or ester, carbonyl and hydroxylic groups or ether on the surface. Unfortunately, X-ray photoelectron spectroscopy only provides an average value of the first 10 to 15 molecular layers. For comparison, depth profiles were measured and wet chemical methods were applied to estimate the thickness of the functionalized layer and the distribution of oxygen-containing functional groups within the near-surface layers. The results indicate that the fiber surface is covered by a monomolecular oxygen-containing layer and that plasma treatment allows a complete oxygen functionalization of the uppermost surface layer. The best conditions for plasma treatment found within the set of parameters applied to generate complete functionalization are: plasma gas O(2)/Ar ratio 1:1, gas pressure 1-1.5 hPa, plasma power 80 W, treatment time >or= 5 min. Additionally, three quick and easy methods are presented to estimate the efficiency of plasma treatment with regard to surface functionalization: pyrolysis, contact angle measurements, and light permeability measurements of aqueous carbon nanofiber suspensions.     

Production of polyacrylonitrile particles by precipitation polymerization in supercritical carbon dioxide

Polyacrylonitrile particles were produced by precipitation polymerization of acrylonitrile (AN) without any colloidal stabilizer in supercritical carbon dioxide as a polymerization medium at about 30 MPa for 24 h at 65 °C at different initiator concentrations (0.8–45.2 mmol/l) and at different AN concentrations (10–40% w/v). An increase in the initiator concentration led to increases in the conversion and in the degree of coagulation and to a decrease in the molecular weight. At AN concentration of 20% w/v, micron-sized, relatively monodisperse polyacrylonitrile particles with clean and uneven surfaces were produced.     

Characterization of CNS disorders and evaluation of therapy using structural and functional MRI

Modern drug development requires technologies that allow rapid translation from the preclinical to the clinical stage. It is obvious that non-invasive imaging modalities such as magnetic resonance imaging (MRI) will play a central role in this regard. This article reviews the use of structural and functional MRI readouts for characterization of central nervous system (CNS) disorders and evaluation of the efficacy of potential CNS drugs. Examples comprise dementia of Alzheimer's type, cerebral ischemia, and neuroinflammation covering both clinical and preclinical aspects. In these examples MRI has been used to obtain relevant structural information on brain atrophy, on the location and extent of ischemic brain areas, and on the number and distribution of demyelinated plaques. These structural data are complemented by readouts assessing the functional consequences associated with the pathomorphological changes. In the last decade, MRI has evolved into a standard tool for the development of CNS drugs. With regard to target-specific/molecular imaging applications MRI is limited by its inherently low sensitivity; complementary imaging modalities utilizing optical and radionuclear reporter systems will thus be required.     

Mercury-free sono-electroanalytical detection of lead in human blood by use of bismuth-film-modified boron-doped diamond electrodes

We report the electroanalytical determination of lead by anodic stripping voltammetry at in-situ-formed, bismuth-film-modified, boron-doped diamond electrodes. Detection limits in 0.1 mol L^–1 nitric acid solution of 9.6x10^–8 mol L^–1 (0.2 ppb) and 1.1x10^–8 mol L^–1 (2.3 ppb) were obtained after 60 and 300 s deposition times, respectively. An acoustically assisted deposition procedure was also investigated and found to result in improved limits of detection of 2.6×10^–8 mol L^–1 (5.4 ppb) and 8.5×10^–10 mol L^–1 (0.18 ppb) for 60 and 300 s accumulation times, respectively. Furthermore, the sensitivity obtained under quiescent and insonated conditions increased from 5.5 (quiescent) to 76.7 A mol^–1 L (insonated) for 60 s accumulation and from 25.8 (quiescent) to 317.6 A mol^–1 L (insonated) for 300 s accumulation. Investigation of the use of ultrasound with diluted blood revealed detection limits of the order of 10^–8 mol L^–1 were achievable with excellent inter- and intra-reproducibility and sensitivity of 411.9 A mol^–1 L . For the first time, electroanalytical detection of lead in diluted blood is shown to be possible by use of insonated in-situ-formed bismuth-film-modified boron-doped diamond electrodes. This method is a rapid, sensitive, and non-toxic means of clinical sensing of lead in whole human blood.     

Thiol- and disulfide-modified oligonucleotide monolayer structures on polycrystalline and single-crystal Au(111) surfaces

We provide a comprehensive study of single- (ss) and double-strand (ds) oligonucleotides with either 25 or 10 bases or base pairs (bp) immobilized on polycrystalline and single-crystal Au(111) surfaces. The study is based on X-ray photoelectron spectroscopy, cyclic and differential pulse voltammetry, interfacial capacitance data, and electrochemical scanning tunnelling microscopy (in situ STM). The sequences used were the 25-bp sequence from the BRCA1 gene (25-mer), while the 10-bp oligonucleotides contained solely linear adenine and thymine sequences. The oligonucleotides were modified by the dimethoxytrityl group (DMT) via a disulfide group [DMT-S-S-ss25-mer and DMT-S-S-ds(AT)₁₀], a pure disulfide group (A₁₀-S-S-T₁₀), or a thiol group [HS-ss25-mer and HS-ds-(AT)₁₀], all via a hexamethylene linker. The overall pattern suggests strategies for controlled adsorption of DNA-based molecules and recognition of complementary strands or other molecules.     

4-Aminobicyclo[2.2.2]octanone Derivatives with Antiplasmodial and Antitrypanosomal Activities

Summary. 4-Aminobicyclo[2.2.2]octanones were converted to their N-oxides and to 4-aminobicyclo[2.2.2]octanes. Furthermore, the 6,7-bis-(4-methoxyphenyl) analogues were synthesized. All products were screened for their activities against Trypanosoma b. rhodesiense and Plasmodium falciparum. The pharmacological results were compared with those of formerly tested bicyclo[2.2.2]octanones and bicyclo[2.2.2]octanols. Structure-activity relationships are discussed.Received April 8, 2003; accepted April 14, 2003 Published online September 25, 2003